Tracked delivery anywhere in the United States. It is free on orders of $100 or more, and a flat $25 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
This shop's own returns policy gives you 15 days from purchase to change your mind, on every product it sells. Send it back in its original packaging with proof of purchase and we refund the price you paid for the goods, processed within 24 to 48 hours of the return arriving. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under our policy for faulty or misdescribed goods, return postage included.
Wash the visor in warm water with mild soap and dry it with a soft cloth. Solvents and abrasive cloths scratch polycarbonate and scratches are permanent. Replace the visor when you can no longer see clearly through it.
Polycarbonate VisorAnti-fog, oversized window
Side and Chin GuardsIntegrated, against splash and debris
Ratcheting HeadgearTurn the dial with gloves on
Extended CrownExtra coverage over the top of the head
About this product
A polycarbonate face shield with an oversized anti-fog window.
Integrated side and chin guards against splashes and flying debris, an extended crown, and a ratcheting headgear knob big enough to turn with gloves on.
A full face visor in polycarbonate with an anti-fog coating and an oversized window, so you get a wide unobstructed view while you work.
Side and chin guards are integrated rather than bolted on, which closes the gaps splashes and debris come through.
The headgear uses a ratcheting dial the listing calls a 370 Speed Dial. The knob is oversized and fine-toothed so you can grab and turn it wearing gloves.
The crown extends further than a plain visor, which adds coverage over the top of the head.
The listing states the clear tint shields meet or exceed ANSI Z87.1 and CSA Z94.3.
A face shield does a job safety glasses cannot: it covers the whole face against splashes, sparks and flying debris. It is not a substitute for eye protection underneath, and most workplaces require both.
The visor is polycarbonate, which is the material that takes an impact without shattering. The window is oversized and anti-fog coated, so the view stays wide and stays clear when you are working warm.
Side and chin guards are built into the shield rather than added on. That matters, because the gap under the chin is where splashes reach the face on a plain flat visor.
The headgear adjusts on a ratcheting dial with a large fine-toothed knob. You can grip and turn it wearing work gloves, which is the point.
Request current test documentation for the exact model before ordering. Compare it with the hazards and standards required by your workplace. A manufacturer-stated standard alone does not confirm suitability for your task.
Still deciding?
Not sure yet? That is fine.
You can change your mind. This shop's own returns policy gives you 15 days from purchase to send it back in its original packaging with proof of purchase, and we refund the price you paid for the goods.
If it turns up faulty, damaged or not as described, that is on us. Under our returns policy, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
No. A face shield is secondary protection. Most workplaces require safety glasses or goggles underneath it, and so does common sense: a shield can be lifted or knocked aside.
What is the visor made of?
Polycarbonate, which absorbs impact instead of shattering.
Will it fog up?
The window carries an anti-fog coating. Ventilation still helps, and the coating wears with cleaning, so replace the visor when it starts fogging again.
Can I use it for welding?
No. This is a clear shield. Welding needs a filter lens shade rated for the process and the amperage you are running.
Can I use it for grinding?
It is designed for splash and flying debris, which covers grinding, but check your site's requirement for a specific impact rating first.
How does the headgear adjust?
A ratcheting dial at the back. The knob is oversized and fine-toothed so you can turn it wearing gloves.
Will it fit over a hard hat?
The listing describes standalone headgear and does not state hard hat compatibility. Ask us before you order if you need a hard hat mount.
Will it fit over my glasses?
A face shield sits well clear of the face, so prescription glasses usually fit underneath. If you want purpose-made cover glasses, the protective glasses on this site are made to fit over prescription eyewear.
How do I verify the safety certification?
Request current test documentation for the exact model before ordering. Compare it with the hazards and standards required by your workplace. A manufacturer-stated standard alone does not confirm suitability for your task.
How do I clean it?
Warm water, mild soap, a soft cloth. No solvents, no paper towel, no abrasive pads. Polycarbonate scratches easily and scratches do not come out.
When should I replace the visor?
When scratches, crazing or pitting make it hard to see clearly, or after any significant impact.
Can I buy replacement visors?
Not listed on the site. Contact us with the model and we will check with the supplier.
Is the chin guard removable?
The listing describes the side and chin guards as integrated, so no.
Does it protect against chemical splash?
It is designed for splashes. Whether it suits a specific chemical depends on that chemical, so check your safety data sheet and your site's requirement.
Can I wear it with a respirator?
Usually yes, but the fit varies by mask. Try them together before you rely on the combination.
Does the anti-fog coating wear off?
It wears with cleaning and time. Wash gently and replace the visor when it stops working.
Is the window tinted?
It is a clear tint, which means you see natural color. It is not a sun or welding filter.
Will it stay on if I bend over?
Set the ratchet snug before you start. A properly adjusted headgear holds position when you look down.
Can I use it outdoors in the rain?
Yes, though water on the visor blurs your view the same way it does on a windscreen.
How much of my face does it cover?
The listing describes an oversized window with an extended crown plus side and chin guards, so coverage runs from above the forehead down past the chin.
Is it comfortable for a long shift?
Comfort comes down to the ratchet adjustment and the weight sitting on your brow. Set it snug rather than tight.
Can I share one between workers?
Yes, if it is cleaned between users and the headgear is readjusted each time.
Is there a warranty?
It carries the consumer guarantees of applicable consumer law. The listing does not publish a separate manufacturer's warranty period.
Do you sell them in bulk?
Yes. Use the wholesale quote form and tell us the quantity.
What currency will I pay in?
Prices and checkout totals are in US dollars. Your delivery charge is shown before payment.
How much is delivery?
Delivery is free anywhere in United States on orders of $100 or more. Under $100 it is a flat $25. Express delivery is $25 on any order, whatever the total.
How long will my order take?
Orders are handled in 24 to 48 hours and then take 5 to 7 days to reach you. You get a tracking number by email as soon as the parcel ships.
Where will I see the final delivery charge?
Choose your delivery option in the cart. Your goods total after discounts determines whether standard delivery is free. The total, including delivery, is shown before you pay.
Can I return it if I change my mind?
Our published policy accepts returns within 15 days of purchase with original packaging and proof of purchase. You pay return postage for a change of mind. Contact us first for the correct return address. Faulty or incorrect goods are handled separately.
What if it arrives damaged?
Tell us straight away and send your order number. We cover the return postage on a damaged or lost delivery and process the refund within 24 to 48 hours of getting the item back.
Are Face Guards suitable for medical or healthcare settings?
This listing does not establish medical-device suitability. Check the exact product documentation and your facility requirements before selecting it for healthcare use.
Do Face Guards provide protection against respiratory viruses?
Do not use this face-shield listing as evidence of respiratory protection. Follow the respiratory protection and infection-control requirements for your task; a shield is not a substitute for a required respirator.
The complete guide
Buying Guide
2SafeSecure USA
Premium full Heavy Duty Clear Face Shield with tinted oversized window for full face coverage protection
Polycarbonate shield with an anti-fog & oversized window for unobstructed views while working
Face Guard | Heavy Duty Clear Face Shield
Free US shipping on orders of US$100 or more after discounts. Express shipping is US$25.
The Safety Full Face Visor is a premium polycarbonate shield with an anti-fog, oversized window for unobstructed views while working.
It features integrated side and chin guards to protect against splashes and the exclusive 370 Speed Dial ratcheting mechanism for easy grip and easy turning.
DUE TO CURRENT DEMAND PLEASE ALLOW 5-7 DAYS SHIPPING
Premium face shield with a clear tinted, oversized window for unobstructed and panoramic views, enabling clear viewing in the most demanding conditions.
FACE COVERAGE
The face shield has integrated side and chin guards to protect against splashes and flying debris.
ADJUSTABLE FIT
The oversized, fine tooth, ratcheting headgear knob makes it easy to grab and adjust, even while wearing gloves.
MANUFACTURER STANDARD CLAIMS
Our clear tint face shields meet or exceed ANSI Z87.1 and CSA Z94.3 standards.
HIGH COVERAGE
The shield features an extended crown to protect against hazards and ensure optimal safety coverage.
Tell us the space, the bed or the patio you are working with, and we will tell you what fits before you buy. Free delivery across the United States on orders over $100.
Face Guard from SafeSecure USA, US$99. A full face visor in polycarbonate with an anti-fog coating and an oversized window, so you get a wide unobstructed view while you work. Side and chin guards are integrated rather than bolted on, which closes the gaps splashes and debris come through. The headgear uses a ratcheting dial the listing calls a 370 Speed Dial. The knob is oversized and fine-toothed so you can grab and turn it wearing gloves. The crown extends further than a plain visor, which adds coverage over the top of the head. The listing states the clear tint shields meet or exceed ANSI Z87.1 and CSA Z94.3. US shipping is free from US$100 after discounts; otherwise US$25. Express shipping is US$25. See shipping and returns policies for full terms.
Premium face shield with a clear tinted, oversized window for unobstructed and panoramic views, enabling clear viewing in the most demanding conditions.
